7
XR
®
8300 & XR
®
8600 Series
Powered Mixer
Congratulations on the purchase of your new XR 8300 or XR 8600 powered mixer from Peavey. The XR 8000 Series powered
mixers include many of the latest technological developments from Peavey engineering. Incorporating a pair of 300, or 600,
Watt ampliers (XR8300 and XR8600 respectively)‚ dual 7-band EQ‚ digital effects‚ FLS® (Peavey’s award-winning Feedback
Locating System)‚ DDT™ speaker protection and a host of other features‚ these compact powered mixers are perfect for any
application.
More power. More features. More reliability. All from Peavey!
Before you begin using your powered mixer it is very important to ensure that the product has the proper AC line
voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear
panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the
particular features next to its number.
Please read this guide carefully to ensure your personal safety as well as the safety of your powered mixer.
FEATURES:
• 8 improved, low-noise‚ mic preamps
• 10 line inputs
• 3-band equalization on each channel
• Monitor send on each channel
• Effects send on all channels
• 25 dB pad: channels 1–6
• Dual main or main/monitor power amp mode switch
• Dedicated 7-band EQ for mains/monitors with FLS™
• DSP-based effects; 16 presets with parameter control
• Signal/clipping indicator on each channel
• 48 Volt phantom power
• Dual 300 Watt per channel internal power amplifiers (XR8300)
• Dual 600 Watt per channel internal power amplifiers (XR8600)
• DDT speaker protection with activity LED
• Mute switch for input channels 1–8
ENGLISH
VENTILATION: For proper ventilation, allow 6" (15.5 cm) clearance on all sides.
To Next Page
Loading...
Need help?
General
