Q1： What kind of battery is used in E1000 PRO? How long it can last?
A： E1000 PRO utilizes high quality UL certified automotive battery cell, it can retain 80% efficiency at 1000 complete
charge cycles.
Q2： What devices can E1000 PRO power?
A： E1000 PRO can power any appliance within 1200W, it can be automatically boosted to 1500W(accept up to 2000W
resistive loads; and 12V DC load at maximum of 10A.
Q3： Can the E1000 PRO be used as UPS?
A： The UPS function is not supported.
Q4： How to calculate the E1000 PRO running time?
A： Running Time=Total Capacity(1002Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q5： Can I use the E1000 PRO indoors and charge the E1000 PRO indoors?
A： Yes, the E1000 PRO is safe to use indoors.
Q6： Does E1000 Pro have built-in MPPT charge controller?
A： Yes, there are two independent built-in MPPT charge controllers; “5521”port supports 12~18V(Max 100W) PV input,
and “GX16MF”port supports 32~95V(Max 400W) PV input.
Q7： What kind of maintenance does E1000 PRO require?
A： Charging E1000 PRO in time when the battery running low; And please charge it at least once for every six months
even if it is not being used.
Q8： How to store the E1000 PRO?
A： Do not store, charge or use E1000 PRO near heat sources, or in an area exposed to flammable or corrosive gas;
Do not immerse in water. Keep away from liquids and store it in a cool and dry place.
FAQS
support@pecron.com
To Next Page
Loading...
