Do you have a question about the Pecron EB3000-24V and is the answer not in the manual?
Specifies the total energy capacity of the battery pack.
Details the type of battery technology used, e.g., LiFePO4.
Lists safety features like over-voltage, overheat, overload protection.
Defines the operating temperature limits for charging and discharging.
Details the port used for cascading multiple units.
Long press the DC ON/OFF button to activate or deactivate DC output.
Ensure battery volume difference is no more than 10% for successful cascading.
Connect E2000LFP to EB3000-24V using the 24V cascade connecting cable.
Red indicator means power discrepancy; green means successful cascade.
Adjust E2000 LFP based on the number of connected EB3000-24V battery packs.
Insert cable with arrow facing up until a 'click' is heard.
Hold protrusions and turn left to pull out the cable.
Press and hold DC for seven seconds in the off state to enter the setting item.
Adjust the number of extra battery packs connected using DC/AC buttons.
Turn on, press DC/AC, then double-click AC to enter settings.
Default value is 10 for voltage calibration; do not modify.
Enter process 002 for 0-current calibration; do not modify.
Enter process 003 for current calibration, default value is 10; do not modify.
Modify battery volume for one or two extra battery packs.
Set low voltage protection, default is 22.0V; do not modify.
Max 2pcs of EB3000-24V can be cascaded to E2000 LFP to avoid damage.
Follow manual's temperature range; high temp risks self-combustion, low temp degrades performance.
| Model | EB3000-24V |
|---|---|
| Type | Portable Power Station |
| Rated Power | 3000W |
| Peak Power | 6000W |
| Battery Type | LiFePO4 |
| Cycle Life | 3500+ Cycles to 80% Capacity |
| AC Outlets | 3 x AC Outlets |
| DC Output | 12V |
| Input | AC, Solar, Car |
| Car Charging Input | 12V |
| Dimensions | 480 x 270 x 310 mm |
| USB Ports | 2 x USB-A (5V/3A), 2 x USB-C (100W PD) |
| Solar Input | 12-150V/20A, 1200W Max |
| Weight | 66 lbs (30 kg) |