support@pecron.com
7: Long press AC to enter the setting of item 006, the
default value is OFF, which means the automatic
shutdown time of the machine without any load.
Shortly press DC can increase the time or shortly
press AC to decrease the time.
8: Long press AC to enter 007, the default value is 22.0
(the number is for low voltage protection, do not
modify it)
9: Long press AC to exit the setting. You will see a word
of EEP if the setting is successful.
1：Protection may be triggered while you are using high power (higher than 1500W) for a long time under high
temperature. In order to meet your needs, please replace with a high-current fuse.
2：After cascading of the power station and the battery pack is completed and the capacity of the power station is
adjusted, please fully charge it to complete the battery calibration.
CONSIDERATIONS DURING CASCADING PROCESS
To Next Page
Loading...
