Q1：What kind of battery is used in EB3000-24V?
A：EB3000-24V utilizes high quality UL certified automotive LiFePO4 battery.
Q2：Which models can the EB3000-24V be cascaded to?
A：Currently EB3000-24V can only be used to E2000 LFP.
Q3：Can the EB3000-24V be charged or discharged separately after cascaded?
A：Yes, but the charging/discharge power will not be shown on the display of E2000 LFP and this will lead to wrong
battery volume showed on the battery display.
Q4：How to calculate the EB3000-24V running time?
A：Running Time=Total Capacity(3072Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q5：Does EB3000-24V have built-in MPPT controller?
A：Yes, EB3000-24V has a built-in MPPT charge controller, which supports 12V-95V(max 400W).
Q6：After the EB3000-24V battery pack is cascaded, can the E2000 LFP be used normally without setting?
A：Yes, E2000 LFP can be used normally without battery calibration, but the battery volume showed on the display is
inaccurate.
Q7：How many EB3000-24V battery packs can be cascaded to E2000 LFP?
A：Max 2pcs of EB3000-24V can be cascaded to E2000 LFP. With too many battery packs, the internal resistance will
become low and the current will become very high. As a result, the fuse of the E2000 LFP will be blown and the
battery packs will be damaged.
Q8：How to store the EB3000-24V?
A：Please turn off the unit and then store it in a dry, ventilated place at normal room temperature. Do not place this unit
near water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to
30% every three months and recharge it to 60% to prolong the battery life.
FAQS
support@pecron.com
To Next Page
Loading...
