UPS Function
The E1500 PRO supports UPS function. It can provide the loads(such as computers, data centers, telecommunication equipment)
near-instantaneous(within 8~20ms) protection from unexpected power interruptions of the main power supply.
Note: Not applicable to specific applications that need transfer time under 8ms, such as servers and workstations.
This UPS function only support protection for loads under 1600W, we recommend that you only connect one device
at a time to avoid overload and thus result in protection failure.
Pecron is not responsible for any devices damege or loss of data resulting from failing to follow the instructions.
support@pecron.com
E1500
PRO
To Next Page
Loading...
