Pg. 16 Pg. 17
Hand Throttle Control
When the pedal assist mode is set to “0”, the pedal assist
function does not engage and the throttle will accelerate the
bike forward.
The throttle control is operated on the right hand side. You
control the throttle by twisting it from its resting posi-
tion. The farther the throttle switch is from its resting position, the more power is
delivered to the motor to accelerate the Pedego. When you want to slow down, you
simply release the throttle and let it return to its resting position and simultaneous-
ly apply the brakes. The Pedego also comes with a Throttle Override function which
allows the throttle to work in pedal assist modes.
The red power button located on the right handle toggles on/
off. The throttle control is operated on the right hand side. You
control the throttle by twisting it from its resting position. The
farther the throttle switch is from its resting position, the more
power is delivered to the motor to accelerate the Pedego. When
you want to slow down, you simply release the throttle and let it
return to its resting position and simultaneously apply the brakes.
Lights
Your Pedego comes equipped with integrated front and rear lights that operate from
the battery. To turn the lights on, push the power button on the LCD meter. To turn
the lights off, repeat pushing down the power button on the LCD meter.
Your Pedego comes with an integrated rear light that operates from the battery. To
turn the light on simply press the “Rear Light” button located on the battery.
Your Pedego comes with an integrated front light that operates from the battery.
To turn the light on press the power button on the LCD meter. To turb the light off
repeat pushing the power button on the LCD meter.
For Interceptor, City Commuter, & Boomerang Plus
For Comfort Cruiser & Boomerang
For Boomerang Plus, City Commuter, Interceptor, & Trail Tracker
For Boomerang & Comfort Cruiser
For Trail Tracker
To Next Page
Loading...
Need help?
General
