TABLE OF CONTENTS
1.0 Foreword
2.0 Safety instructions
3.0 Reception at plant
4.0 Loading and unloading (methods)
4.1 Storage
5.0 Starting (assembly and preparation)
5.1 Commissioning
5.2 Start-up
5.3 Precautionary notes
6.0 Setting the safety valve
6.1 Installing the frequency variator
6.2 Installing motor with reversible poles
7.0 Pulleys (aligning)
7.1 Belts (tightening and replacement)
8.0 Oil
8.1 Oil table
9.0 Maintenance (main points)
9.1 Maintenance plan
9.2 Cleaning
9.3 Cleaning filters
10.0 Pressure Relief Valve
11.0 PG-30 Muffler filter for suction
12.0 Common optional accessories
13.0 Soundproof cabin
13.1 View of soundproof cabin
13.2 View of bolt location in cabin base
14.0 Unloading valve
15.0 PG-35 and PG-38 unit protection filters
15.1 View of protection filter
16.0 Directive 94/9/CE; see ATEX
17.0 RNG-type blowers for gas
18.0 RS-type blowers with gaskets
19.0 Possible faults and how to detect them
3
To Next Page
Loading...