Need help?Do you have a question about the PEELLE 2745 and is the answer not in the manual?
Explains hazard symbols and their meanings for safe operation.
Covers electrical code compliance, grounding, and circuit requirements for installation.
Details FCC rules, RFI emissions, and user responsibilities regarding interference.
Summarizes key features, operation principles, and system architecture of the controller.
Identifies and describes the function of various components on the controller board.
Details wiring requirements for AC power supply and circuit protection.
Instructions for connecting the encoder for closed-loop motor control.
Specifies wiring for landing door motors, including parallel connection.
Details wiring for car door and retiring cam motors using a relay.
Describes wiring for landing door pushbuttons, switches, and unlocking devices.
Specifies interface signals from elevator control to the car door controller.
Explains wiring for an optional slave controller for specific motor configurations.
Details output signals from the car door controller to the elevator control system.
Explains how to set and use IND (Independent) and AUTO (Automatic) operation modes.
Guide to using onboard buttons and LCD for setting controller parameters.
Step-by-step instructions for the automatic door opening learning process.
Explains the meaning of various displays like Door Type, Channel, Address, and Radio status.
Describes input status indicators and the function of the Door Stop indicator on the LCD.
General| Brand | PEELLE |
|---|---|
| Model | 2745 |
| Category | Controller |
| Language | English |
To Next Page