40
Your booster seat requires a minimum of cleaning
and maintenance. Do not clean with harsh products
or solvents. Keep moving parts clean. In case, clean
plastic parts with a damp cloth. Do not use water
with harness and latching mechanisms. Protect the
booster seat from extreme cold, water, rain and sun
exposure. Prolonged exposures to these elements
can change the colors in the material but also change
their mechanical properties. Store the booster seat in
a dry area if not used for long periods.
The upholstery is likely to be removed and cleaned
frequently. Follow the procedure below to remove
the fabric and reassemble it properly. Check the
booster seat features before disassembly and make
sure that the same features are still working once
the booster seat is set up for use again. Extra care is
required when removing padding to avoid breaking
the white EPS panels on the booster seat.
All the upholstered covers (seat, backrest and
headrest) can be machine washed at 87° F (30° C).
30
°
Cleaning and maintenance
To Next Page
Loading...
