Pegasus M852-90 - User Manual

M800

M832 Series: 
M852 Series: 
INSTRUCTIONS
M832 Series: Safety stitch machine
M852 Series:Overedgers
BEDIENUNGSANLEITUNG
M832er Baureihe: Sicherheitsnaht-maschinen
M852er Baureihe: Überwendlichnähmaschinen
INSTRUCTIONS DE SERVICE
Série M832: Safety stitch machine
Série M852: Surjeteuses-raseuses ultra-rapides
INSTRUCCIONES PARA EL MANEJO
Serie M832: Maquinas de puntada de sequridad
Serie M852: sobreorilladoras
使用说明书
M832 系列 : 安全缝缝纫机
M852 系列 : 包缝缝纫机

Summary

INSTRUCTIONS

1. Introduction

2. Indications of dangers, warnings and cautions

Symbols, signs and;or signal words which attract users attention

Identifies warning symbols and signal terms to draw operator attention to critical points.

Explanation of Symbols

3. Safety precautions

Safety precautions

Details essential safety steps for operating the machine.

Before operating the machine

4. Notes for each procedure

CAUTION Installation, preparation

WARNING Handling machine oil

WARNING Precautions while you are running the machine

CAUTION Maintenance, Check, Repair

6. Protectors for safety

Schematic diagram of the sewing machine table

Sewing machine installation

Lubrication

To fill the machine with oil

Threading

Replacing the needle

Adjusting the thread tension

Adjusting the presser foot pressure

Adjusting the differential feed ratio

Adjusting the stitch length

Replacing the upper knife

Replacing the lower knife

Adjusting overedge width

Sharpening the knives

Cleaning the machine

Oil replacement

Changing the fulcrum on the presser foot

Positioning and adjusting the needle thread take-up

Positioning the thread guides; Adjusting the amount of thread to be supplied from the needle thread take-up

Guides on setting thread guides and adjusting thread supply for the needle thread take-up.

M832 Positioning the thread guides

M852 Series Adjusting the needle thread guides

M852 Positioning the thread guides

Positioning the double chainstitch looper thread take-up and thread guides; Adjusting the amount of thread to be supplied from the double chainstitch looper thread take-up

Positioning the looper thread take-ups and the thread guide; Adjusting the amount of the looper thread supply

Specifications of subclass Series M800

2. Dangers, warnings and cautions

Symbols and messages

WARNING Before starting the machine

2. Indications of danger, warning and precaution

Symbols, signs and signal words

3. Safety rules

Safety measures

Details essential safety steps for operating the machine.

Before starting the machine

4. Observations on the following processes

PRECAUCION Installation, equipment

PRECAUCION Handling machine oil

WARNING Safety measures for operation

PRECAUCION Maintenance, control, repairs

6. Protective devices

Needle breakage shield

Instructions on the proper use and importance of the needle breakage shield.

Finger deflector

Pulley cover

Pegasus M852-90 Specifications

General

Brand	Pegasus
Model	M852-90
Category	Sewing Machine
Language	English