Pegasus W600 series User Manual

,(""
7;9?;DJD=H6DB;?IJD=
F.))Ta!7PdaTXWT
,!^STa!-(DPST[!X]cTa[^RZ!UaTXPa\\PbRWX]T
?DHIGJ8I?EDH
F.))HTaXTb
,!^a!-(]TTS[T!Rh[X]STa!QTS!X]cTa[^RZ!bcXcRW!\PRWX]T
?DHIGJ8I?EDH!9;!H;GK?8;
HraXT!F.))
CPRWX]T!X]cTa[^RZ!o!QaPb![XQaT!o!,!^d!o!-!PXVdX[[Tb
?DHIGJ88?ED;H!F6G6!;B!C6D;@E
HTaXT!F.))
CP`dX]Pb!ST!_d]cPSP!T]caT[PiPSP!"X]cTa[^RZ"!ST!RP\T
RX[u]SaXRP!h!ST!,!^!-!PVdYPb
36,2.,
=?45<B0 F..,')*=
F..,')+=
F..,')-=
F..,')/=
F..,')/>
F..,'+->
From the library of: Superior Sewing Machine & Supply LLC
~ PEHASUS~

Pegasus W600 series Specifications

General

Brand	Pegasus
Model	W600 series
Category	Sewing Machine
Language	English

Summary

Introduction

Safety Precautions

General Safety Rules

Essential guidelines to prevent accidents and ensure safe machine operation.

Clutch Motor Operation Safety

Important note on clutch motors and pedal operation after power off.

Before Operating

Lubrication

Ensures proper oil level in the oil pan for machine operation.

Manual Lubrication

Applies oil to specific points by hand for initial use or long breaks.

Filling HR Device with Silicone Oil

Fills silicone oil reservoirs to prevent thread breakage and fabric damage.

Threading

Guides for threading needles and loopers, including knotting and trimming threads.

Threading Diagram

Illustrates the correct threading paths for different thread conditions.

Test Sewing

Presser Foot Pressure Adjustment

Adjusts the pressure of the presser foot for optimal stitch formation.

Differential Feed Ratio Adjustment

Adjusts the differential feed to control fabric stretching or gathering.

Stitch Length Adjustment

Sets the stitch length, noting its dependency on differential feed changes.

Thread Tension Adjustment

Adjusts tension for needle, upper looper, and lower looper threads.

Maintenance During Use

Cleaning the Machine

Details on cleaning needle plate slots, feed rows, and machine interior.

Replacing the Needle

Instructions on correct needle insertion, alignment, and securing.

Checking Oil Circulation

Visual check to confirm oil is circulating correctly during sewing.

Checking and Replacing Oil Filter

Guidance on inspecting and replacing the oil filter every six months.

Replacing the Oil

Procedure for the first oil change (after one month) and subsequent changes.