Pegasus W1600 Series User Manual

W1600

W1600 Series
23 
INSTRUCTIONS
W1600 Series
2 or 3-needle cylinder bed interlock stitch machine
BEDIENUNGSANLEITUNG
W1600 Baureihe
2- oder 3-Nadel-Freiarm-Interlockmaschine
INSTRUCTIONS DE SERVICE
Serie W1600
Machine interlock 2 ou 3 aiguilles a bras libre
INSTRUCCIONES PARA EL MANEJO
Serie W1600
Maquina de puntadas entrelazadas debase de cilindro
de 2 o 3 agujas
使用说明书
W1600 系列
双针、三针筒形机座型绷缝机

Pegasus W1600 Series Specifications

General

Brand	Pegasus
Model	W1600 Series
Category	Sewing Machine
Language	English

Summary

2. Indications of dangers, warnings and cautions

3. Safety precautions

Safety measures

General safety measures for machine operation and maintenance.

Safety precautions when you perform maintenance on the machine.

Before operating the machine

CAUTION: Installation, preparation

WARNING: Handling machine oil

WARNING: Before starting the machine

WARNING: Precautions while you are running the machine

CAUTION: Maintenance, Check, Repair

6. Protectors for safety

Needle breakage shield

Finger deflector

Presser foot

Assembling the machine rest board

Sewing machine installation

Instructions for safely mounting the sewing machine head onto the machine rest board.

Lubrication

Manual lubrication

Threading

Adjusting presser foot pressure

Adjusting the main feed dog’s movement amount

Procedure to adjust the feed amount for the main feed dog.

Adjusting the differential feed dog’s movement amount

Adjusting the thread tension

Replacing the needle

Oil replacement

Adjusting the needle thread take-up and the needle thread guard

To produce soft stitches

Changing the specifications for soft stitches to that for tight stitches

Changing the specifications for tight stitches to that for soft stitches

Adjusting the needle thread guides

Adjusting the needle thread presser spring

Adjusts the position of the presser spring to reduce needle thread loop size.

Adjusting the looper thread take-up

Adjusting the looper thread guides

Guides the looper thread supply for proper stitch formation.

Adjusting the top cover thread spreader

Adjusting the top cover thread spreader height

Adjusting the top cover thread spreader front to back

Adjusting the feed dog height

Adjusting the presser foot lift

Sets the distance from needle plate to presser foot bottom surface.

Adjusting the needle height

Adjusting the looper

Adjusting the looper-needle setting distance

Sets distance from right needle center to looper point.

Adjusting the looper avoiding distance

Ensures clearance between left needle and looper point.

Adjusting the needle guard (rear)

Adjusting the needle guard (front)

Adjusting the amount of backward tilt on the presser foot

Adjusts the presser foot's backward tilt angle for sewing conditions.

Checking and cleaning the oil filter

Adjusting the left-to-right position of the lower knife holder

Adjusting the stroke of the upper knife

Adjusts the upper knife's stroke based on fabric thickness.

Replacing the knives

To replace the lower knife

To replace the upper knife

To adjust the overlap of the knives

Adjusts the overlap between upper and lower knives for proper cutting.

Safety precautions when performing maintenance on the machine

2. Indications of danger, warning and precaution