Pegasus W1500N Series User Manual

W1500N

W1500NSeries
 
INSTRUCTIONS
W1500NSeries
2 or 3-needle flatbed interlock stitch machine
BEDIENUNGSANLEITUNG
W1500N Baureihe
2 oder 3-nadel flachbett maschine
INSTRUCTIONS DE SERVICE
Série W1500N
Machine interlock à plateau à 2 ou à 3 aiguilles
INSTRUCCIONES PARA EL MANEJO
Serie W1500N
Máquinas de puntada entrelazada "interlock"con
2 ó 3 agujas
使用说明书
W1500N 系列
双针、三针平机座型绷缝缝纫机

Pegasus W1500N Series Specifications

General

Brand	Pegasus
Model	W1500N Series
Category	Sewing Machine
Language	English

Summary

2.Indications of dangers, warnings and cautions

Symbols, signs and/or signal words which attract users' attention

Explains symbols for danger, warning, and caution.

Symbols and messages

3.Safety precautions

Safety measures

Details safety precautions to be taken during maintenance and operation.

Before operating the machine

4.Notes for each procedure

Transportation

Installation, preparation

Cables

Ground

Handling machine oil

Before starting the machine

Precautions while you are running the machine

Maintenance, Check, Repair

5.Location of warning labels and safety devices

6.Protectors for safety

Needle breakage shield

Warns against operating with the needle breakage shield open for eye safety.

Finger deflector

Warns against inserting fingers into the needle area to prevent injury.

Pulley cover

Instructs not to remove the pulley cover for safety during high-speed rotation.

Presser foot

Warns against inserting fingers into the presser foot mechanism.

Front cover

Side cover

Sliding plate

Assembling the machine rest board

Sewing machine installation

Machine setup is crucial for proper operation and safety.

Lubrication

Oil

Specifies the recommended oil for the machine.

To fill the machine with oil

Required amount of oil

Manual lubrication

Threading

Adjusting presser foot pressure

Adjusting the differential feed ratio

Adjusting stitch length

Adjusting the thread tension

Replacing the needle

Oil replacement

To drain the oil

Adjusting the needle thread take-up and the needle thread guard

Adjusting the needle thread guides

Adjusting the needle thread presser spring

Explains how to adjust the presser spring for needle thread loop size.

Adjusting the looper thread take-up

Adjusting the looper thread guides

Instructions for adjusting looper thread guides for correct thread supply.

Adjusting the spreader

To adjust the spreader

Adjusting the spreader thread guide

Adjusting the thread guide

Adjusts the thread guide path for the decorative thread.

Adjusting the top cover thread guide

Adjusting the feed dog height

Adjusting the presser foot lift

Explains how to adjust the presser foot lift height.

Adjusting the needle height

Adjusting the looper

Adjusting the looper-needle setting distance

Adjusts the distance between the right needle center and looper tip.

Adjusting the looper avoiding distance

Adjusting the needle guard (rear)

Adjusting the needle guard (front)

Changing the maximum differential feed ratio

Replacing the upper knife

Replacing the lower knife

Adjusting overlap of the knife cutting edges

Adjusting the lower knife holder left to right

Adjusting the elastic guide

Adjusting the feeding amount of the elastic

Adjusting the roller pressure

Inserting the elastic into the roller