INTRODUCTION
Pag. 4 1.1 Generality
TECHNICAL CHARACTERISTICS
Pag. 5 2.1 Product ID codes
Pag. 6 2.2 Product series - Technical characteristics
Pag. 8 2.3 Overall dimensions
Pag. 9 2.4 Identification data
Pag. 10 2.5 Transport and storage
Pag. 11 2.6 Warranty conditions
INSTALLATION
Pag. 12 3.1 Standard equipment for assembly and use
Pag. 12 3.2 Mechanical assembly of the panel
Pag. 17 3.3 Electrical wirings
Pag. 18 3.4 Connection of the front panel
Pag. 19 3.5 Pre-use checks
Pag. 20 3.6 Compressor motor circuit breaker calibration
Pag. 21 3.7 Closing the electrical panel
FUNCTIONALITY
Pag. 22 4.1 Functions managed by the ECP300 EXPERT electrical panel
DATA PROGRAMMING
Pag. 23 5.1 Control panel
Pag. 23 5.2 Front keypad
Pag. 24 5.3 LED Display
Pag. 25 5.4 Generality
Pag. 25 5.5 Symbology
Pag. 25 5.6 Setting and displaying the set point
Pag. 26 5.7 Level 1 programming (User Level)
Pag: 26 5.8 List of Level 1 variables
Pag. 27 5.9 Level 2 programming (Installer Level)
Pag. 27 5.10 List of Level 2 variables
Pag. 30 5.11 Switching on the ECP300 EXPERT electrical panel
Pag. 30 5.12 Hot/cold activation/deactivation conditions
Pag. 30 5.13 Manual defrost activation / deactivation
Pag. 31 5.14 Defrost with thermostated resistances
Pag. 31 5.15 Hot gas defrost
Pag. 31 5.16 Pump-Down function
Pag. 31 5.17 Password protection
OPTIONS
Pag. 32 6.1 TeleNET monitoring / supervision system
Pag. 32 6.2 Net configuration with Modbus-RTU protocol
DIAGNOSTICS
Pag. 33 7.1 Diagnostics by means of alarm codes
Pag. 34 7.2 Troubleshooting
MAINTENANCE
Pag. 35 8.1 General safety rules
Pag. 36 8.2 Maintenance
Pag. 36 8.3 Spare parts
ATTACHMENTS / APPENDICES
Pag. 37 A.1 EU Declaration of Conformity
Pag. 38 A.2 TeleNET network connection diagram
Pag. 39 A.3 Part list
To Next Page
Loading...
