Pego PLUS300 EXPERT U THR - Page 13

PLUS300 EXPERT U THR
Pag. 13
USE AND MAINTENANCE MANUAL
Rev. 01-18
6
PHASE 5 advancing
7
Refreshment
8
Ambient temperature value/ parameters
9
Ambient relative humidity / parameters value / error codes
10
Time / date / time parameters value / running program / timer
11
PRG
Programming (the controller is in programming phase)
12
Cold (flashing if called for dehumidification only)
13
Hot (flashing if called for dehumidification only)
14
Humidification
15
Dehumidification
16
Defrost
17
Fans
18
Light (flashing if the door switch is active)
CHAP. 5 - Parameters programming