Pego PLUS300 EXPERT U THR User Manual

PLUS300 EXPERT U THR
Pag. 14
USE AND MAINTENANCE MANUAL
Rev. 01-18
19
Alarm
20
Stand-by
GENERAL FEATURES
For safety reasons and to simplify the operator’s work, the PLUS300 EXPERT U THR has
two programming levels; the first level is used to modify SETPOINT parameters (i.e. those
parameters that are changed frequently). The second level is for general parameter
programming of the various board work modes.
It is not possible to access the first programming level directly from the second level: you
must exit the programming mode first.
KEY TO SYMBOLS
For practical purposes the following symbols are used:
• () indicates the UP key used to increase value and to force the defrost / pause;
• () indicates the DOWN key used to decrease value, to mute the alarm and to force
the air changing.
SET POINT PROGRAMMING AND DISPLAYING
1. Push the SET key to display the current SET POINT (temperature and humidity
alternately).
2. Press the SET key and push one of () or () keys to modify the SET POINT value.
Release the SET key to return to cold room temperature display; modifications are saved
automatically.
5.4
CHAP. 5 - Parameters programming
5.5
5.6

Pego PLUS300 EXPERT U THR Specifications

General

Brand	Pego
Model	PLUS300 EXPERT U THR
Category	Control Panel
Language	English