4
Owner’s manual
EN
PRECAUTIONS
Choose the mounting location where the unit will not interfere with the normal driving function of
the driver.
Before nally installing the unit, connect the wiring temporarily and make sure it is all connected
up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modications
of the vehicle.
Install the unit where it does not get in the driver‘s way and cannot injure the passenger if there is
a sudden stop. Like an emergency stop.
Avoid installing the unit where it would be subject to high temperature, such as from direct sun-
light, or from hot air, form the heater, or where it would be subject to dust, dirt or excessive vibra-
tion. Do not expose this equipment to rain or moisture.
DIN FRONT-MOUNT (Method A)
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropri-
ate tab according to the thick-
ness of the dashboard material
and bend them inwards lo secure
the holder in (Fig. 1) place.
3. Screw
To Next Page
Loading...
Need help?
General
