To Next PageTo Next Page
Need help?Do you have a question about the Pelco Spectra and is the answer not in the manual?
Prior to installation and use, observe these warnings.
Lists the different Spectra dome drive models available.
Details agency compliance certifications for the products.
Step-by-step instructions for installing the dome drive.
Information displayed when the dome powers up or resets.
Instructions for controlling pan and tilt movements.
Instructions for magnifying the image using optical and digital zoom.
Details on programming and using preset camera locations.
How to program and use different scanning modes.
Information on defining and blanking video zones.
How to program and use full and half patterns.
Configuration of alarm inputs, priority, and response.
How to use auxiliary outputs for external devices.
Functionality for parking the dome at a preset location.
Overview of the main menu and its submenus for configuration.
Instructions for accessing the main programming menu.
How to adjust backlight compensation for optimal video.
Setting the maximum optical and digital zoom levels.
How to reset camera settings to factory defaults.
Configuration of automatic and manual gain control.
Settings for automatic iris control (mode, level, peak).
How to select electronic shutter speeds.
Configuration of auto-focus modes.
Adjusting picture sharpness automatically or manually.
Settings for auto, red-blue, and magenta-green white balance.
Turning line synchronization on or off.
Setting the dome's behavior after power restoration.
Defining the behavior of auxiliary output relays.
Resuming previous activity after alarms are cleared.
Setting the minimum time the dome stays at an alarm.
Setting alarm inputs as high or low priority.
Choosing patterns for alarm responses.
Defining zones for video blanking.
Enabling or disabling the auto flip feature.
Controlling pan speed based on zoom level.
Setting manual and scan limit stops for dome movement.
Setting inactivity time before parking the dome.
Adjusting scan speed for auto, random, and frame modes.
Setting the duration for full or half patterns.
Instructions for cleaning the dome exterior and interior.
How to obtain the service manual for detailed repair.
General| Pan Range | 360° continuous |
|---|---|
| Manufacturer | Pelco |
| Weather Rating | IP66 |
| Operating Temperature | -40°C to +60°C |
| Day/Night | Yes |
| IR Illumination | Yes |
| Power Supply | 24V AC |
| Protocols | Pelco D, Pelco P |
