To Next Page
B
Brett VillaSep 5, 2025
What does error code F10 mean on my Pelgrim Dishwasher?
- EErik ChaseSep 5, 2025
If your Pelgrim dishwasher displays error code F10, it indicates overfilling water. Try unblocking the drainage pump.
What does error code F10 mean on my Pelgrim Dishwasher?
If your Pelgrim dishwasher displays error code F10, it indicates overfilling water. Try unblocking the drainage pump.
How to improve drying in my Pelgrim GVWC330L/P06 Dishwasher?
If your dishes aren't drying properly in your Pelgrim dishwasher, consider these points: * Make sure that the Automatic door opening option is activated. * Ensure the dishwasher is fully loaded for optimal drying. * Check the rinse aid level and dosage. Top up if needed or increase the dosage setting. * If using all-in-one detergents and the TAB setting is activated, switch to separate detergent, salt, and rinse aid, or deactivate the TAB setting.
How to remove grease deposits from my Pelgrim Dishwasher?
If you notice grease deposits in your Pelgrim dishwasher, select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive 70°. Alternatively, run a self-cleaning program.
Why is the control panel on my Pelgrim GVWC330L/P06 Dishwasher not responding?
If the control panel on your Pelgrim dishwasher isn't responding, wait a moment before trying again if you've just opened the door. Ensure the door is open, as the control panel only works when open. Also, clean the control panel with a dry or slightly damp cloth to remove any dirt.
What to do if I cannot close the door of my Pelgrim GVWC330L/P06?
If you cannot close the door of your Pelgrim dishwasher, first check that the baskets are correctly positioned horizontally. If the door lock isn't clicking into place, open the door, press and hold Automatic door opening until the display counts down, wait until the countdown ends, and then close the door again to see if the lock engages.
Why is my Pelgrim Dishwasher making a rattling sound?
If your Pelgrim dishwasher is making a rattling sound, ensure that the dishes are placed securely and that the spray arms can rotate freely. Spin the spray arms to check.
Why is there detergent residue in the compartment of my Pelgrim GVWC330L/P06?
If you find detergent residue in the dispenser of your Pelgrim dishwasher after washing, make sure the detergent compartment is dry when adding detergent. Also, check that the dishes are not blocking the detergent compartment from opening.
How do I prevent spots on stainless steel or silver in my Pelgrim GVWC330L/P06?
To prevent spots on stainless steel or silver in your Pelgrim dishwasher: * Rinse off foodstuffs like mustard, mayonnaise, lemon, vinegar, salt, and dressings from dishes if you're not starting the dishwasher immediately. Consider using the 1h 65° program with the Speed wash option. * Separate dishes made from different metals, such as silver, stainless steel, and aluminum, to avoid contact during dishwashing.
How to get rid of bad odour in my Pelgrim GVWC330L/P06?
To eliminate bad odors in your Pelgrim dishwasher, clean around the seals and in corners with a washing-up brush and a low-foaming cleaner.
How to remove spots or films from dishes in my Pelgrim GVWC330L/P06 Dishwasher?
To address spots or films on dishes from your Pelgrim dishwasher: * Adjust the rinse aid dosage setting. * If using all-in-one detergent with the TAB setting activated, switch to separate detergents or deactivate the TAB setting and add salt and rinse aid. * Ensure the salt compartment is not empty and top up with salt if needed. * Verify that the water softener setting is correct.
General| Brand | Pelgrim |
|---|---|
| Model | GVWC330L/P06 |
| Category | Dishwasher |
| Language | English |
