A
B
J
E
F
G
D
K
L
M
I
H
C
System Specifications
A
.
Product water storage tank
B. Tank valve
C. Tank tubing (3/8
〃
white)
D. Air-gap faucet
E. Drain connection assembly
F. Drain tubing (3/8
〃
white)
G. Quick connect tting
H. Drain tubing (1/4
〃
black)
I. Faucet tubing (3/8
〃
blue)
J. Four-stage desalinator
K. Feed water tubing (1/4
〃
green)
L. Feed valve assembly (with adapter and
shut-off valve).
M. Two-stage remineralizing post-lter
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper completion
of this installation will require basic familiarity with standard sink plumbing and proper use of common hand and power tools.
Improperly installed systems could result in water damage due to leaks or flooding.
System Dimensions
9.72
〃
W
×
13.75
〃
D
×
15.38
〃
H
( 24.7
×
34.9
×
39.1 cm), 11 lbs. (5 kg.)
Dimensions and Weight
Performance Specifications Feed Water Requirements
Membrane Production 50 GPD
System
Production 14.61GPD
TDS Rejection 96.5%
Recovery
1
26.76%
System tested at 50 psig, 750ppm TDS at 77°F.
1 The percentage of the feed water available
as reverse osmosis treated water under
normal operating conditions.
Pressure 40-80 psi (275 kPa
-
552 kPa)
Temp 40°F
-
100°F (4°C
-
38°C)
TDS <2000 mg/L
Chlorine <1.0 mg/L
Turbidity <1 NTU
SDI <5
pH 4-8
Feed water must be potable, municipal water. Must
be free of potential membrane foulants such as Iron,
Hydrogen Sulfide and Manganese.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
(behind cover)
(not shown)
.09
PELICAN PRO-RO 6 Instruction Manual
To Next Page
