pellenc Excelion 1200 - ATTACH and Adjust the LENGTH of the HARNESS; THE HARNESS ( Supplied with the Tool )

19
2
3
4
1
5
6
53_13_138A
PREPARING THE MACHINE FOR USE
ATTACH AND ADJUST THE LENGTH OF THE HARNESS,
THE HARNESS (
supplied with the tool
)
Adapting the length of the harness helps adjust the "vertical position" of the brush cutter so that it is within
reach and the cutting head is pointing slightly downwards.
(This adjustment is made at the same time as the balance adjustment and the orientation of the handlebar).