Table of contents
INTRODUCTION .............................................................................3
BILAN CARBONE ...............................................................................................9
SAFETY INSTRUCTIONS ....................................................................10
GENERAL SAFETY INSTRUCTIONS FOR THE TOOL ................................................................. 11
SAFETY WARNINGS FOR THE EXCELION BRUSH CUTTER AND GRASS TRIMMER .......................................12
SAFETY MEASURES FOR THE CHARGER AND THE BATTERY ........................................................13
SAFETY EQUIPMENT ..........................................................................................14
SAFETY INDICATIONS ......................................................................14
DESCRIPTION AND TECHNICAL CHARACTERISTICS ............................................15
TECHNICAL CHARACTERISTICS .................................................................................16
PREPARING THE MACHINE FOR USE .........................................................16
ASSEMBLY/DISASSEMBLY OF THE FRONT HANDLE ................................................................17
ASSEMBLY/DISASSEMBLY OF THE CARRYING EYE AND THE DISTANCING DEVICE ......................................17
ASSEMBLY/DISASSEMBLY OF THE SAFETY CASING ................................................................17
ADJUSTING THE WORKING POSITION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ADJUSTING THE WORKING POSITION ............................................................................18
ADJUSTING THE POSITION OF THE FRONT HANDLE ...............................................................18
ATTACH AND ADJUST THE LENGTH OF THE HARNESS, .............................................................19
THE HARNESS (
) .............................................................................19
ADJUSTING THE LENGTH OF THE TELESCOPIC TUBE ..............................................................20
ADJUSTING THE CUTTING HEAD ORIENTATION ....................................................................20
STARTING UP AND OPERATION ..............................................................21
START-UP ....................................................................................................21
HANDLING THE MACHINE ......................................................................................21
HEAD ROLL CUT ..............................................................................................23
HEAD TAP CUT ...............................................................................................25
MULTI-CUT CUTTING HEAD .....................................................................................27
MAINTENANCE ............................................................................29
PART NUMBERS FOR SPARE PARTS .............................................................................30
INCIDENTS ................................................................................32
«PELLENC SA» TERMS OF WARRANTY AND NON-RESPONSIBILITY CLAUSE .......................35
‘‘CE’’ STATEMENT OF CONFORMITY ..........................................................37
To Next Page
Loading...
