4
b. BATTERY WARNING AS BELOW
1. Do not dispose of batteries in fire, batteries may explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
c. REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the
desired button. The remote controller will work at distances of up to roughly
16.4 feet and the angle of 30 degree included between right and left from the
receptor. The batteries must be removed from the remote controller before it is
scrapped and that they are disposed of safely.
d. OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan
switches off and temperature of the motor is no longer going up so that plastic
parts of the fan don’t subject to deformation so far so to be burned by the
overheat if the motor is overheat for any unexpected reason.
II.Remote Control (Fig.5)
a. BATTERIES
(battery not included in the packaging)
1. Slide the battery compartment Cover.
2. Insert the batteries, and make sure that the batteries are placed as shown in
the Fig.6.
3. Slide back the battery cover.
NOTES: Use manganese or alkaline batteries of type "AAA". Do not use
rechargeable batteries.
POWER
TIMER
MODE
OSCILLATION
FAN SPEED
Fig.5
Fig.6
Remote control
AAA Battery, 1.5V
Battery cover
To Next Page
Loading...
