SETUP
The first time you turn on the Peloton Guide, it will walk you through setup and activation. Each step is also accessible via the Settings
(see p. 34) menu.
1. REMOTE SETUP
When you turn on the Guide for the first time, you will be prompted to pair the remote. If you ever want to pair your remote again, or pair
another remote, navigate to Settings › Remote › Pair New Remote.
2. CALIBRATE VOLUME BUTTONS
Many TVs will allow the Guide remote to control TV volume. In this step, your remote will learn how to communicate with the TV. If you
skip this step, you can always set up TV volume controls later by navigating to Settings › Remote › Calibrate Volume Buttons.
3. NETWORK SETUP
Next, you will be prompted to connect to a Wi-Fi network. Select your network and enter the password using the onscreen keyboard.
You can disconnect from a network or connect to a different network at any time by navigating to Settings › Network.
4. TIME ZONE SETUP
To make sure the clock on the Guide is set correctly, select your time zone.
To change your time zone at any time, navigate to Settings › System › Date & Time.
5. CALIBRATE YOUR SCREEN
SETUP | 16
To Next Page
Loading...
Need help?
General
