Pelpro PP70 - Troubleshooting; Power Related

PelPro Pellet Stove • 7103-171C • 11/1/18
pelprostoves.com
29
Troubleshooting
Troubleshooting
Troubleshooting
Pro Tip
Check passages to assure
they are clear of ash and
obstructions. Poor airow
leads to poor performance of
your Stove.
Troubleshooting your Stove
Visit pelprostoves.com or scan the code:
A
1
Zone
1
Zone
2
Zone
2
Zone
Power Related
In the event of a power outage:
• If using a generator, PelPro recommends a steady state
generator for best Stove performance.
• This Stove needs 110v to run properly. This Stove has
not been tested for use with a third party battery backup.



A
Stove plugged in but no response
• Unplug your Stove
• Check your home’s circuit breaker
• Reset snap disc (located between drop tube and hopper
(Zone 2)
• Visually inspect wires, blowers and power cord for
breaks or wear to nd cause of possible short circuit
(Zone 2)
Component (i.e. blower) fails to start or fails to turn o󰀨
• Unplug your Stove
• Check all connections and power plugs are secure
• Visually inspect wires, blowers and power cord to nd
cause of possible short circuit