Pelpro PP70 - Getting Started; Pallet Removal; Whats Included

PelPro Pellet Stove • 7103-171C • 11/1/18
pelprostoves.com
4
Getting Started
Getting Started
Getting Started
WARNING!
Inspect Stove and components for damage.
Damaged parts may impair safe operation.
• Do NOT install damaged components.
• Do NOT install incomplete components.
• Do NOT install substitute components.
Report damaged parts to dealer.
Pallet Removal
There are bolts holding your PelPro Stove in place on the
pallet. To remove your Stove from the pallet:
What’s Included
Pallet Removal
Visit pelprostoves.com
or scan the code:
Owner’s
manual
Door handleCleaning tool
Outside air kit
components:
Power cord
4” Flex hose Termination Cap Hose clamp Screws (4)
CAUTION!
Risk of cuts, abrasions or ying debris. Wear
protective gloves & safety glasses during install.
Metal edges are sharp.
Online Installation & Trouble
Shooting Videos
1
Loosen the three
retaining bolts on
the back of the
Stove and remove
the right and left
side panels.
2
Using a 5/16 inch wrench, on
each side of the Stove remove
the two bolts.
Remove shipping brackets
by reaching into Stove in the
same area as the just removed
bolts.