PendoTECH PressureMAT PMAT1 - Page 17

PressureMAT User Guide
Revision 1
Page 17/29
Global Settings Menu
The Global Settings menu can be used to program settings for the system that impacts all
channels or turn ON or OFF features or view system information. To access the Global
Settings menu press the BACK button three times in rapid succession. The following screen
appears:
GLOBAL SETTINGS
> Information
System Power
Control Service
Communication
Date and Time
At this screen the UP/DOWN arrows are used to select the Global Setting. HOME/START
can be pressed at any time to return to the HOME screen.
Information
If SELECT/PROG button pressed, system information including firmware version is displayed.
Press the BACK button to return to the main menu.
System Power
If SELECT/PROG button pressed, the system power is removed. Press the HOME/START to
restore power.
Control Service
If SELECT/PROG button pressed, the following sub-menu appears with the following default
settings:
CONTROL SERVICE
> PV Decimal On
Alarm Latch Off
Backlight High
Audio Beep On
Keypad Secure Off
At this screen the UP/DOWN arrows are used to select the Control Service setting.
PV Decimal
If turned on, the 2
nd
decimal place is shown, if off only one decimal place is shown.