Need help?Do you have a question about the Penlon AV-S and is the answer not in the manual?
General| Ventilation Modes | SIMV, Manual |
|---|---|
| Minute Volume | Up to 30 L/min |
| Oxygen Concentration | 21 to 100% |
| Alarms | High pressure, Low pressure, Apnea, Power failure |
| Power Supply | 100 to 240 V AC |
| Application | Used in anesthesia and intensive care units |
Outlines the user's obligations for safe operation and maintenance of the ventilator.
Covers critical safety information, hazards, and precautions for ventilator use.
Specific safety warnings and operational cautions related to the oxygen monitor.
Defines the intended application and patient population for the AV-S Ventilator.
Overview of ventilator features, components, and the breathing cycle.
Details the pneumatic and electrical systems, including gas supply and power.
Explains the operation of the control panel, touchscreen, and navigator.
Covers various ventilation modes including advanced spontaneous breathing options.
Overview of the oxygen monitor's features, sensor, and alarm capabilities.
Covers physical, functional, and alarm specifications for the AV-S.
Details the performance and alarm specifications of the integrated oxygen monitor.
Steps for mounting, electrical connection, and gas supply setup.
Procedures for connecting breathing systems, filters, and spirometers.
Instructions for installing, calibrating, and setting the O2 monitor.
Outlines daily, weekly, and function tests to ensure correct operation before use.
Defines recommended service intervals and procedures for maintenance.
Lists required tests and checks for regular service intervals.
Procedure for removing, cleaning, and refitting the patient block assembly.
Lists part numbers for one, two, and four-year preventive maintenance kits.
Detailed parts lists for control unit, screen, regulator, and patient block assemblies.
Guidance on battery charging, storage, and disposal.
Procedures for cleaning components and guidelines for sterilisation.
To Next Page
