www.PennBarry.com 14
MOTOR AVAILABILITY
Variable Speed Motor Control
PennBarry oers Lek-Trol™ solid state controllers to alter the high speed of most direct drive motors by as much as 50%. If variable speed
is required, check the Lek-Trol™ availability table below to verify that controllers exist for the fan model selected. Remember, Lek-Trol™
controllers are currently only available for direct drive motors including all standard Open Drip Proof (ODP) 60 Hz motors. Not all totally
enclosed motors are currently available with variable speed control. Inverter rated motors suitable for use with variable frequency drives
can be supplied for belt drive models. Contact your local PennBarry representative for availability.
Available Lek-Trol™ Speed Controls
Model
60 Hz 50 Hz
ODP Totally Enclosed Totally Enclosed
115V 115V 200V 208V 230V 110V 220V 240V
FX08S - - - - - - - -
FX08R LT25 - - - - - - -
FX10S - - - - - - - -
FX10R LT30 LT30 LT35 LT35 LT35 LT30 LT35 LT35
FX11V - - - - - - - -
FX11S - - - - - - - -
FX11R LT30 - - - - - - -
FX11Q LT50 - - - - - - -
FX13V - - - - - - - -
FX13S - - - - - - - -
FX13R LT30 LT30 LT35 LT35 LT35 LT50 LT35 LT35
FX13Q LT45 LT50 LT35 LT35 LT35 LT50 LT35 LT35
FX16V - - - - - - - -
FX16S - - - - - - - -
FX16R LT50 - - - - - - -
FX16Q1 LT40 - - - - - - -
FX16Q2 LT75 - - - - - - -
FX18V LT60 - - - - - - -
Lek-Trols™ indicated for multi-speed models (eg., FX16V/S/R) are applicable only for the high speed. Do not use on low or medium speed for multi-speed
models. Items noted with ( - ) are not applicable.
To Next Page