www.PennBarry.com 18
FAN SELECTIONS
Options and Accessories
Construction Accessories
0 = None
A = Aluminum curb cap (standard)
F = Floating hinge kit (aluminum base)
G = Floating hinge kit (steel base)
H = Hinged sub-base (aluminum base)
J = Hinged sub-base (steel base)
S = Steel curb cap
W = Wall mounted adaptor
Curb
0 = None
C = Curb
Note: Curbs ordered separately on all
PLOPs
Damper
00 = None
D = Damper
XX = Special
Extended Lube Lines
0 = None
L = Extended lube lines
Guard/Screen
0 = None
B = Bird screen
Paint/Coating
0 = None
F = Epoxy powder coat (light gray)
G = Epoxy powder coat with UV
protection (gray)
H = Hi-temp powder coat (black)
J = Non-stick powder coat (clear)
K = Phenolic epoxy powder coat
(gray)
L = Phenolic epoxy powder coat with
UV protection (gray)
N = Polyester powder coat*
X = Special
* Colors only available in Polyester
Powder Coat
Paint Color*
00 = None
50 = Chrome green
55 = Pale green
56 = Dove gray (PPC standard)
61 = White
63 = Oxford beige
65 = Dover white
66 = Desert tan
70 = Black
73 = Smoke gray
77 = Brick red
79 = Peppercorn
81 = Pale brown
83 = Chocolate brown
85 = Timeless bronze
94 = Charcoal
X = Special
* Colors only available for polyester
powder coat
Pedestal
0 = None
A = Galvanized pedestal
B= Galvanized vented pedestal
C = Aluminum pedestal
D = Aluminum vented pedestal
Spare Belt(s)
0 = None
1 = 1 spare set
2 = 2 spare set
Special Applications
0 = None
2 = Restaurant exhaust (UL762)
4 = UL heat & smoke
Special Construction
0 = None
B = Spark resistance (AMCA B)
C = Spark resistance (AMCA C)
D= Spark resistance (AMCA C) + high
wind (Miami-Dade)
E= Spark resistance (AMCA B) + high
wind (Miami-Dade)
H = High wind (Miami-Dade)
Stainless Steel
0 = None
B = Hardware & shaft
H = Hardware
S = 304SS Shaft
X = Special
Electrical Accessories
Controllers
0 = None
A = 0-10V output potentiometer
1 = Lek-Trol solid state speed
controller (mounted)
2 = Lek-Trol solid state speed
controller (loose)
3= Multi speed controller, iQ-MS
(ECM only)
4 = iQ-IPCM-no power supply (ECM
only)
5 = iQ-IPCM with 115V/230V power
supply (ECM only)
6 = iQ-IPCM with 277V power supply
(ECM only)
7 = Provided by others
V = VFD (belt drive only)
Note: VFD can be ordered separately
Service Switches and ITW*
0 = None
1 = NEMA 1 ITW only
3 = NEMA 3R ITW only
A = NEMA 1 - loose
C = NEMA 1 - mounted and wired
D = NEMA 3R - loose
F = NEMA 3R - mounted and wired
G = NEMA 4 - loose
N = NEMA 7 - loose
Q = NEMA 9 - loose
X = Special
* ITW - Internal wiring not provided on
explosion proof motors
Switches / Sensors
0 = None
A = Airminder switch (time delay)
B = Airminder+restat
F = Firestat switch
Transformer
0 = None
B = 277Vx115V
To Next Page
Loading...