Need help?Do you have a question about the Pentair Fleck 5800 XTR and is the answer not in the manual?
General| Operating Pressure | 20 - 125 psi |
|---|---|
| Model | 5800 XTR |
| Type | Water Softener |
| Control Valve | 5800 XTR |
| Brine Tank Capacity | Varies based on model |
| Dimensions | Varies based on system configuration |
| Valve Size | 1 inch |
| Resin Tank Size | Varies based on model |
| Salt Tank Capacity | Varies based on model |
| Cycle Options | Backwash, Brine Draw, Slow Rinse, Rapid Rinse |
| Display | LCD |
| Programming | User-programmable |
| Bypass Valve | Optional |
| Warranty | 5 years |
Warns about potential injuries, property damage, or pollution from non-compliance with safety rules.
Specifies that only qualified and professional personnel are authorized for system operations.
Advises against putting fingers into the product due to moving parts and residual voltage.
Guides users through initial setup steps for touchscreen controller language and units.
Details how to initiate or cancel a manual regeneration cycle and advance through steps.
Describes error indicators, audible alarms, and procedures for silencing or viewing detailed error information.
Mandatory cleaning and maintenance must occur at regular intervals and be documented by Pentair-certified professionals.
Outlines steps for obtaining technical support, including collecting product information and contacting dealers.
To Next Page
