Do you have a question about the Pentair Flotec GARDENJET 1500 and is the answer not in the manual?
Model | GARDENJET 1500 |
---|---|
Horsepower | 1.5 HP |
Maximum Flow Rate | 1500 GPH |
Inlet Size | 1 inch |
Outlet Size | 1 inch |
Inlet/Outlet Size | 1 inch |
Details electric shock risk, serious risk to individuals/objects, and pump/system damage warnings.
Read manual carefully before installing, store manual, contact service if problems arise.
Warns the pump cannot be used for sea water and inflammable, corrosive, explosive or dangerous liquids.
Ensure pump is disconnected from electrical supply during installation.
Protect the electropump and pipes from bad weather or freezing conditions.
To prevent possible injuries, avoid inserting hands into the pump's mouth if connected to mains.
Verify that the voltage and frequency of the electropump correspond to the mains.
Ensure the electric system is grounded in accordance with the law.
Ensure the electric system has a high-sensitivity circuit breaker of 30 mA.
The pump has a built-in thermal protection switch that stops the pump if overloaded.
The power cable must be replaced by qualified personnel only.
Warnings for application compliance, dry running, and closed delivery operations.
Avoid humidity, protect from rain, ensure connections are protected from inundation.
Fill suction pipe and pump body, close cap, open delivery devices, insert plug, press switch.
Make sure the machine is disconnected from electric power supply before performing maintenance.
Periodically check pressure and current absorption. Use a filter for sand/corrosive materials.
Empty pump completely, rinse, store in a dry location protected from frost if not used for a year.
If the unit does not work, check power supply, control equipment or handling.