Do you have a question about the Pentair HAFFMANS RPU-353 and is the answer not in the manual?
Brand | Pentair |
---|---|
Model | HAFFMANS RPU-353 |
Category | Measuring Instruments |
Language | English |
Attention, warning and danger symbols used in this manual have the following significance.
Always follow basic safety precautions when using this equipment to reduce risk of injury.
Description of the four control switches arranged around the display screen.
Instructions for switching the instrument on and off using the I/O switch.
How the instrument behaves when the battery charge level is low.
Steps to prepare the instrument before starting a recording run.
Procedure to set the zero point of the pressure channel for PRU-353.
Procedure to start recording by activating the top right switch.
Methods to stop the recording, including manual and automatic stops.
Procedure to remove recorded files from the instrument.
The total number of Pasteurisation Units accumulated during the recording run.
Changing the PU cut-off temperature in steps of 0.1°C.
Selecting a Base value (60, 70, or 80°C) for PU calculation.
Selecting a Z value (6.94*, 7, or 10°C) for PU calculation.
PU calculation settings when displaying in Fahrenheit (°F).
Recommendations for servicing and re-calibration of the equipment.
Information on battery care, charging, and replacement.
FAQ related to battery charge indicator, charging, and battery life.
Steps for printing recorded files from the PU monitor via RPC-80.
Sets general format for printed text, graphs, and displays.
Selecting PU calculation constants and PU Cut-off temperature.
Storing and comparing recorded runs with ideal pasteurising run templates.
Error message for input overflow from External link.
Error message for unexpected data from monitor.
Messages concerning the battery of the RPC-80.
Messages concerning communication between RPC-80 and other equipment.
Messages concerning the memory of the RPC-80.
Messages concerning the printing operation of the RPC-80.
Messages concerning templates used with the RPC-80.