To Next PageTo Next Page
Need help?Do you have a question about the Pentair JUNG PUMPEN BASICLOGO EXM Series and is the answer not in the manual?
General| Brand | Pentair |
|---|---|
| Model | JUNG PUMPEN BASICLOGO EXM Series |
| Category | Control Unit |
| Language | English |
Precautions to prevent damage from product failure, including alarms and backup.
Covers personnel qualifications, operator safety, and operational hazards.
Safety during installation, maintenance, and accident prevention measures.
Normal mode: pumps activate based on wastewater level and time.
Allows manual draining, bypassing automatic level control for the collecting chamber.
Troubleshooting steps for pump failure and fuse checks.
Clarifies the meaning of various indicator lamps and fault signals.
Procedure to silence acoustic alarms using the reset button.
Details on connecting pressure sensors for level detection and setting switch-on levels.
Wiring instructions for connecting the control unit to power and pumps.
Configuring pump run-off time to prevent dry running.
Setting maximum pump run-time for safe operation.
Configuring peak-load, non-peak-load, and single-pump modes for duplex units.
Connecting external buzzers, lights, and remote failure indicators.
Guide for installing optional accessories like battery packs and time meters.
Procedure for regularly inspecting the dry running protection system.
