To Next PageTo Next Page
Need help?Do you have a question about the Pentair JUNG PUMPEN HIGHLOGO 2-25 and is the answer not in the manual?
Works must be performed with the equipment shut down; harmful substances must be decontaminated.
Modifications require manufacturer agreement; use original spare parts for safety.
Operational safety is guaranteed only if used for intended purpose; do not exceed limiting values.
Cordon off areas, check lifting gear, never work alone, wear safety gear, check for explosion risk.
Enable or configure settings for operation in potentially explosive atmospheres (ATEX zones).
Signals that the pump's motor protection has been triggered and the pump is switched off.
Indicates that motor current exceeded the maximum limit, causing the pump to switch off.
Technical specifications for the dry running protection device, including material, temperature, and switching capacity.
Provides instructions for installing the dry running protection float switch and safety barrier.
Technical specifications for the safety barrier module, covering voltage, current, temperature, and intrinsic safety data.
Details electrical connection requirements for the safety barrier, including potential equalization and conductor sizing.
Operating instructions for the safety barrier, noting it's maintenance-free and must be used undamaged.
General| Product type | Control Unit |
|---|---|
| Operating voltage | 230 V |
| Mains frequency | 50 Hz |
| Protection class | IP54 |
| Manufacturer | Pentair JUNG PUMPEN |
| Model | HIGHLOGO 2-25 |
