ii
PROWLER
®
920 Robotic Inground Pool Cleaner Installation and User’s Guide
INTRODUCTION, SPECIFICATIONS AND WARNINGS
INTRODUCTION
Thank you for purchasing a Pentair Robotic Pool Cleaner.
We are sure that your Pentair Robotic Pool Cleaner will provide you with reliable, convenient
and cost-effective pool cleaning. Its reliable filtration in all pool conditions and active brushing,
enhance pool hygiene.
Robotic Pool Cleaners by Pentair deliver advanced cleaning technologys, long-lasting
performance and easy maintenance. You and your family will be free to enjoy your swim with
full confidence that your pool is completely clean.
SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
WARNINGS AND CAUTIONS
Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an
earth leakage interrupter (ELI). Or residual current device (RCD) see page 11.
• Keep the power supply out of standing water
• Position the power supply at least 3m/10ft away from the edge of the pool
• Do not enter the pool while the Pool Cleaner is working
• Unplug the power supply before servicing
Cautions
Use the Pool Cleaner in the following water conditions only:
Chlorine Maximum 4 ppm
pH 7.0-7.8
Temperature 6-34°C
NaCl Maximum 5000 ppm
Digital Power supply
Input: 200-230 AC Volts
50-60 Hertz
Output: <30 VDC
IP 54
To Next Page
Loading...
