PROWLER™ 930 Robotic Inground Pool Cleaner Installation and User’s Guide
EnglishEnglish
9
MAINTENANCE
Cleaning the Filter Baskets
Note: It is highly recommended that you clean the lter basket after each cleaning cycle. Too much debris in the
lter will restrict the suction power of the Prowler™ 930 Robotic Pool Cleaner and reduce its effectiveness.
To clean the lter basket, follow the instructions given below:
STEP 1:
Open the Filter Cover
When the lter cover is opened the lter basket handle
will pop up independently. See Figure 19 and 20.
Figure 19
Figure 20
STEP 2:
Lift the basket out of the cleaner body
Figure 21
STEP 3:
Remove and Rinse the Inner Filter Basket
Remove the inner lter basket
from the outer filter basket
see Figure 22.
Dump any loose debris from the
inner basket and thoroughly
rinse out any remaining debris
with a garden hose.
Figure 22
STEP 4:
Empty the Filter Basket
Open the latch at the bottom
of the filter basket. This will
release the bottom lid of the
basket and dump much of the
collected debris. See Figure 23.
Figure 23
STEP 5:
Clean the Outer Filter Basket
Thoroughly clean the lter basket with a garden hose.
See Figure 24.
Figure 24