PROWLER™ 930 Robotic Inground Pool Cleaner Installation and User’s Guide
English
2
Overview
Prowler™ 930 robotic pool cleaner is designed to scrub, vacuum, and lter (including the waterline) your inground
pool. Before operating this product, be sure to read and follow all warning and safety instructions on pages iii-iv.
Packaged Components:
• Cleaner and 18 m. communication cable
• Power supply
• Cleaner Caddy (Prowler 930 only)
Cleaner Features:
• Weekly Timer
• Wall and Waterline Scrubbing
• Top Loading Basket Filtration
• Quick Clean
• Bluetooth® Wireless Technology Connectivity
• “Prowler™ 930” Mobile App for Smartphones
Cleaner and 18 m.
communication cable
Power Supply
Cleaner Caddy
Initial Setup
Before using the cleaner for the rst time, complete the following steps:
STEP 1:
Power Supply or Caddy Placement
The Prowler 930 cleaner comes with a cleaner caddy
that will need to be assembled before continuing fur-
ther into this section. See page 4 for Caddy Assembly
instructions.
Position the caddy or power supply at least 3.5 m (12 feet)
from the edge of the pool. See Figure 1.
Figure 1
STEP 2:
Unroll Communication Cable
Unroll the cable and stretch it out completely so that is
has no kinks. See Figure 2.
Figure 2
PREPARATION OF THE POOL AND CLEANER
To Next Page
Loading...
