Pentair PROWLER 930W - Spot Clean Functionality; Device Settings and Features

6
PENTAIR HOME for PROWLER® 930W Robotic Inground Pool Cleaner User's Guide
SpotClean
Spot Clean Mode allows you to manually direct your cleaner to specic
areas of the pool.
Tap the Spot Clean tab on the Prowler Dashboard to open the Spot
Clean screen (FIGURE11).
The cleaner can be directed around the pool in one of two ways:
• In-appJoystick(Default): Guide the cleaner using your thumb
• TiltControl: Guide the cleaner by tilting your phone in the
appropriate direction.
Tap the TILT PHONE TO CONTROL toggle to enable Tilt Control.
DeviceSettings
Device Settings can be accessed by tapping the
Device Settings icon ( ) in the top-right of the
Prowler Dashboard (refer to Prowler Dashboard on
page 4).
1−ProductOverview: View and edit general
information about your Prowler such as pool
address and your Prowler's software version
and device ID.
2−Notications:Control where and how device
notications are delivered.
3−ProductSupport:Opens www.pentair.com
within the app.
4−ContactaProfessional:Use your address to
nd and contact a local pool professional.
5−WiFi: View and update the WiFi network your
Prowler is paired to, as well as the last reported
signal strength.
6−DirectConnect:Program and operate the
cleaner without an internet connection via
Bluetooth
®
wirless technology.
7-LEDCongurations: Turn the cleaner's LED
indicator ON/OFF or adjust its behavior.
8-RunHistory:View your cleaner run-time data,
histories and errors.
The cleaner must be connected to WiFi to
collect and display this information.
9-RemoveDevice:Remove your Prowler from
your Pentair Home account.
FIGURE12
FIGURE11