SPECIFICATIONS
MODEL NUMBER: 9325-043-101
PUMP DESIGN: Positive Displacement
3 Chamber Diaphragm Pump
CAM: 3.0 Degree
MOTOR: Permanent Magnet, P/N 11-175-00
Thermally protected
VOLTAGE: 24 VDC Nominal
(Reduced Volume @ 12VDC)
WATTS: 120W
AMPS: 4.0 MAX
FUSE: 7.5 AMP (Automotive) Not Included
INTERNAL BYPASS: 105-110 P.S.I. MAX (7.2-7.5 bars)
MAXIMUM LIFT: 230 ft (70 M)
SUBMERSION: 100ft (30 M) Maximum Below
Waterline
OUTLET PORT: 1/2" (13 mm) Barbed Fitting
INLET: 50 Mesh Stainless Steel Screen
MATERIALS: High Strength Plastics
Stainless Steel Hardware
APPLICATION: Potable water well pump
NET WEIGHT: 6 lbs (2.72 kg)
Design and specifications are subject to change without notice
NOTES:______________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
____________________________________________________________________________________________
(95 mm)
3.75 in.
(305 mm)
12 in.
To Next Page
Loading...
