EasyManua.ls Logo

Pentair SHURflo 9325 Series User Manual

Pentair SHURflo 9325 Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNERS MANUAL
Note:
BEFORE CONNECTING OR OPERATING
THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
9325 SERIES
12/24 VDC POWERED
SUBMERSIBLE PUMP
WARNING
DO NOT use any SHURflo pump for petrol/gasoline,
petroleum products, solvents, thinners or ANY other
flammable liquid with flash point below 180 F [82 C].
NOT FOR USE where flammable vapors are present.
Question and Answer IconNeed help?

Do you have a question about the Pentair SHURflo 9325 Series and is the answer not in the manual?

Pentair SHURflo 9325 Series Specifications

General IconGeneral
BrandPentair
ModelSHURflo 9325 Series
CategoryWater Pump
LanguageEnglish

Summary

Application Worksheet and Terms

Application Worksheet

Fields for recording pump installation details and system parameters for optimal performance.

Terms and Notes

Definitions of key terms (H1, H2, H3, Drawdown) and important notes on pump submersion.

Pump Flow Tables

Pump Connection and Installation

Cable Selection and Boot Assembly

Guidance on selecting appropriate submersible cable and assembling the cable boot for proper sealing.

Install Hose and Fitting

Instructions for attaching the discharge hose and fitting to the pump outlet securely.

Hook-up Safety Line

Procedure for attaching a corrosion-resistant safety line to the pump for secure handling.

Band Lines and Install Pump

Steps for banding electrical cable, safety line, and installing the pump into the well.

Troubleshooting Guide

Pump Operates: No Flow or Reduced Flow

Addresses common causes and corrections for pumps that run but have no or low flow output.

Pump Will Not Operate

Diagnoses and provides solutions for pumps that fail to start or operate at all.

Pump Removal and Disassembly

Prepare Pump for Removal

Steps to safely disconnect power and remove the pump from its installation location.

Disconnect Hose and Cable Adapter

Procedure for disconnecting the discharge hose and the electrical cable adapter from the pump.

Remove Pump Components

Instructions for removing key components like lift plate, filter screen, receptacle, and canister.

Remove Upper Housing and Motor

Detailed steps for separating the upper housing and motor assembly from the pump body.

Pump Re-Assembly

Install Upper Housing O-Rings and Bypass Assembly

Procedure for installing large O-rings and the bypass poppet/spring assembly into the upper housing.

Install Valve Housing and Lower Housing

Steps for correctly seating the valve housing and lower housing assemblies.

Install Motor Assembly

Guidance on aligning and inserting the motor into the lower housing assembly.

Install Canister and Filter Screen

Steps for fitting the canister, securing it with screws, and installing the filter screen.

Connect Receptacle and Cable Adapter

Instructions for connecting the electrical receptacle and cable adapter to the pump.

Install Outlet Fitting and Lift Plate

Procedure for installing the outlet fitting and the lift plate with O-rings onto the pump.

Install Plug (Cable Adapter) Assembly

Steps for connecting the plug (cable adapter) to the receptacle and securing it.

Technical Specifications

Parts List and Replacement Kits

Model 9325 Submersible Pump Parts List

A detailed list of individual pump components with item numbers and quantities.

Replacement Part Kits

Catalog numbers and descriptions for available replacement part kits for the pump.

Warranty Information

Limited Warranty Procedure

Details the SHURflo limited warranty policy, coverage period, and procedure for claims.

Related product manuals