Pentair SHURflo 9325 Series - Remove Upper Housing and Motor

10
PUMP REMOVAL AND DISASSEMBLY (CONTINUED)
9. Remove Upper Housing (N) and Motor (T) (Fig. 11)
Note: Keep all parts clean after disassembly.
The Upper Housing Assembly contains small parts.
Be careful not to lose parts after removing Upper Housing.
9.1 Use a 5/32" Allen Wrench to remove the 3 screws (L).
9.2 Before separating the Upper Housing (N) from the Motor (T), place the assembly with the Upper Housing (N) down
and the Motor (T) facing up.
9.3 Separate the Upper Housing (N), Valve Housing (R), Lower Housing (S), Poppets (Q), and Springs (P).
Contact an authorized distributor for assistance with diagnosis and replacement Parts.
Refer to page 15 for a Replacement Part Kit list.
FIGURE 11
FIGURE 10
L
N
O
P
Q
R
S
T
U
V
W
M