TABLE OF CONTENTS
PAGE
INTRODUCTION 2
TOOLS REQUIRED FOR INSTALLATION & MAINTENANCE 2
COMPONENTS NEEDED FOR INSTALLATION 2
APPLICATION WORKSHEET and FLOW TABLES 3
PUMP CONNECTIONS & INSTALLATION INSTRUCTIONS 5
TROUBLESHOOTING 8
PUMP REMOVAL and DISASSEMBLY 9
PUMP RE-ASSEMBLY 11
TECHNICAL SPECIFICATIONS 14
PARTS LIST and REPLACEMENT PART KITS 15
SUBMERSIBLE PUMP ASSEMBLY DRAWING 16
WARRANTY 17
INTRODUCTION
This manual has been provided as an aid to the operator with information about
installing, operating, and servicing of the SHURflo 9325 Series Submersible Pump. The
engineers and technicians who designed and manufactured these pumps have developed
these instructions from their experiences.
These instructions should be read completely before installing your new pump. Keep this
manual readily available at all times for use when installing, operating, or servicing your pump.
For proper placement in the well refer to the application worksheet on pages 3-4.
This pump is not to be used with flammable liquids.
TOOLS REQUIRED FOR INSTALLATION & MAINTENANCE
#1 and #2 Phillips Screwdriver Wire Cutters
5/64" Allen Wrench Wire Strippers
5/32" Allen Wrench Pliers
3/16" Allen Wrench Dry Cloth or Cotton Tipped Applicator for cleaning O-Ring grooves
Electrical Tape Tie wraps
COMPONENTS NEEDED FOR INSTALLATION
APPLICATION WORKSHEET
POWER CABLE (Not Included)
COUPLER AND DISCHARGE FOR OUTLET (Included)
DISCHARGE HOSE OR PIPE (Not Included)
SAFETY LINE (Not Included)
POWER SUPPLY (Not Included)
FUSE (Not Included)
CONTROLLER (Not Included) Use a Linear Current Booster for optimum performance
To Next Page
Loading...
