whenyouaredrillingormountingthedevice!Otherwisethereisariskto
lifeandlimb!
Handle the mains adapter cable carefully! Place all cables in such a
position that they cannot be damaged or become a trip hazard.
Otherwisethereisarisktolifeandlimb!
Do not allow the device to come into contact with moisture! Otherwise
thereisarisktolifeandlimb!
Makesure that the batteriesarenotshort-circuited,northrown into fire.
They must also not be recharged or opened. There is a danger of fatal
injuryduetoexplosion.
Do not connect any damaged device (e.g. transport damage) and
unplug the mains adapter from the mains socket immediately in the
caseofdamage. Arrange for the damagetobe repaired immediately by
aspecialist.
Protect the product against strong magnetic or electrical fields and
againststrongmechanicalloadsandvibrations!
Useonlytherecommendedbatterytypes.
Useonlynewbatteriesanddonotmixbatteries.
Removeoldorusedbatteriesfromthedevice.
If the unit is to be unused for a longer period disconnect the mains
adapterfromthemainssupplyandremovethebatteries.
Prise open the batterycompartment cover [19] from the loweredge of
theremotecontrol[14].
Place the supplied CR 2032 battery [20] in the battery compartment
[21]sothatthe"+"symbolisvisible.
Replacethebatterycompartmentlidontotheremotecontrol.
If required, batteries can be installed in the main unit in order to keep
the unit operational should the mains adapter power supply be
interupted.
Removethethreescrews[12]withasuitablescrewdriver.
Removethebatterycompartmentcover[13]fromthemainunit.
Place 8x suitable AA batteries in the battery compartment, paying
attentiontothepolarity(seeFig.B).
Replacethebatterycompartmentcover.
Plug the DC-plug of the mains adapter [25] into the mains adapter
connection[11]ofthemainunit.
Connectthemainsadaptertoasuitablemainspoweroutlet.
T
T
The sensor cannot detect through metal objects, objects containing
metalorthickobjects(seeFig.D).
!
he microwave sensor detects mainly towards the rear side of the main unit
(seeFig.C,I).Itdetectsmovementofobjects(people,cars,animalsetc.).
he sensor can detect movement through objects or walls of wood, plastic,
concreteand brick, the detectionrangeis reduced by half(dependant on the
material-seeFig.C.,II).
7
8
. Commissioning
. Location
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
#
Leaking or damaged batteries can cause burning upon contact with the
skin.Wherethisisthecaseusesuitableprotectivegloves.
F band 433,05 - 434,79
T
C
I
O
D
Model ID:
Operate the alarm unit with 12 V DC only! Use a mains socket close to
the device and ensure that you can access the socket easily. The mains
supply must be 230 V, 50 Hz, fitted with a suitable fuse or cut-out
deviceandcomplywiththe applicableregulations. Otherwise thereisa
risktolifeandlimb!
Do not leave small childrenunsupervised with the appliance, batteries,
packing material or small parts. Otherwise there is a risk of fatal injury
duetochoking.
Make sure that thealarm sound is not triggeredwhen someone is in its
directvicinityOtherwisethereisariskofseverehearingdamage!
Donotdamageanycablesorpipes forgas,electricity, waterortelecoms
requency MHz
Maximum radiated transmission power < 10 mW
ransmitting range: max. 20 m (in free space)
oding: preset into the main unit
ndicator: LED
perating temperature: 0 °C to +40 °C
Housing material: ABS
imensions: approx. 38 x 69x7mm
SAW06D-120-0500GD
Input voltage: 230 V
Input AC frequency: 50 Hz
Output voltage: 12.0 V DC
Output current: 0.5 A
Output power: 6.0 W
Average operating efficiency: 80,33 %
Power consumption at no load: 0.06 W
M
Danger!
ains adapter
6. Safetyinstructions
!
If these points are not heeded, property, life and health are
endangered.
!
!
!
GB-19
S
D
F band 433,05 - 434,79
2400,0 - 2483,5 MHz
Sm
ensor type: microwave
etection range: max. 7 m (in free space)
requency MHz
Maximum radiated transmission power < 10 mW
Operating frequency: MHz
Maximum radiated transmission power < 100 mW
peaker power: ax. 5 W
Siren duration:
max. 20 sec.
perating temperature: 0 °C to +40 °C
pplication: indoor use only
ousing material: ABS
imensions: approx. 158 x 173 x 116 mm
perating voltage: 3 V DC
Power consumption: max. 5 mA
ower supply: 1x CR 2032 battery
O
A
H
D
O
P
Remote control EW01R
To Next Page
Loading...
