Pentax espio 80V User Manual

È
È
5. DATE MODEL
When the battery cover is opened, date and time
initialize to '98 1 1 and 00:00.
Use the protrusion parts of the strap clamp to
depress the button.
Selecting the Mode Year Month Day
Press the DATE button @ ar K Mini
to change the date mode EFTER Rus
as shown in the list. (Blank) No imprinting
Month Qay Year
Day Month Year
Correcting the Date
1 Depress the SELECT button @ to select
desired category of digits.
2 Depress the ADJUST button @ to change
digits.
3 Depress the SELECT button @ until the
blinking digits stop.
Correcting the Time [Day Hour Minute]
1 Correction of the time can also be done in the
same procedure as the one for the date.
6. VIEWFINDER DISPLAYS AND
GREEN LAMP INDICATIONS
6-1. Viewfinder displays
© Autofocus frame
Focus on the subject with this frame.
@ Picture area
When taking a normal picture, compose the
scene with this frame.
© Close distance (0.8 to 1.0m) compensation
frame.
When the camera-to-subject distance is
between 0.8m and 1.0m, compose the scene
within this frame.
6-2. Green lamp indication
@ Lighting: Flash is charged. Shutter release
possible.
@ Blinking: Flash is being charged.

Pentax espio 80V Specifications

Lens and Viewfinder

lens type	Pentax power zoom 38-80mm /6.3-12.5
viewfinder magnification	0.42 x (38mm WIDE) — 0.78 x (80mm TELE)
viewfinder field of view ratio	83%

Power and Battery

power source	One 3V lithium battery (CR123A or equivalent)
battery life	Approx. 15 rolls of 24-Exposure film when using flash 50% of the time
auto power shut-off	3 min

Weight and Dimensions

width	120.5 mm
height	70.5 mm
depth	51.5 mm
weight	225 g