Need help?Do you have a question about the Pentax G6 and is the answer not in the manual?
Summarizes key technical innovations and advantages of the G6 GNSS receiver.
Details physical characteristics and components of the G6 receiver.
Provides instructions for setting up the G6 receiver as a base station and a rover.
Explains how to use the power key for turning the receiver on/off and confirming operations.
Guides on performing receiver self-checks to diagnose potential issues with modules.
Details methods for measuring antenna height for base/static and rover modes for accurate surveying.
Introduces the sensor calibration process for tilt survey functions.
Allows viewing current work status, system mode, datalink, coordinates, and satellite information via the web interface.
Provides details on firmware version, GNSS firmware, GSM mode, and sensor/battery information displayed in the web UI.
Used for downloading static data and packaging data through the web interface.
Covers firmware upgrades, receiver registration, self-checking, and password changes via the web UI.
Introduces settings for Working Mode, Device Configuration, and NMEA Message via the web interface.
Describes the two types of cases: Rover case and Base case, and how to distinguish them.
Details the lithium-ion batteries used by the receiver and the charger.
Describes the UHF all-direction transmitting and receiving antennas and their frequency ranges.
Lists other accessories like support pole, bracket, connectors, and quick connectors.
To Next Page
General