Pentax MV-1 - Lens Mounting; Removing Lens and Body Mount Covers; Matching Alignment Dots; Mounting in Dark Conditions

LENS MOUNTING
Remove the rear lens and
body mount covers
7 Match the red dot O on the
camera body with the red dot
© on the lens. Insert the lens
into the body and turn it
clockwise until the lens
locks with a click.
* n the dark, when the red
dots are difficult to see, align
the raised white node © on
the lens barrel with the lens
release lever © by touch. Then
turn and lock as above,
4 To detach, hold the camera
with your left hand. Depress
the lens release lever ® while
turning the lens counter¬
clockwise with your right hand.
If you have to put the lens
down without the rear lem
cap, place it only front-element-
down, never front-element-up.
When changing lenses outdoors
with film in the camera, avoid
direct sunlight.
6 *