Pentax Optio E - LED Indicators; Camera Buttons; Navigation Buttons

Introduction 4
LED Indicators
English
LED Indicators
Camera Buttons
Navigation Buttons
The 4-way navigation buttons and the OK button allow you to access the various options available from the
On Screen Display (OSD) menu. You can configure a wide range of settings to ensure maximum results from
your photos and videos.
LED LED Status Camera Status
Power/Flash LED Off Power Off.
Blue (steady) Ready to take picture.
Blue (blinking) Camera busy
Self-timer LED Off Self-timer off.
Red (blinking) (10 sec) Timer count down, flash after 10 seconds.
Red (blinking) (2 sec) Timer count down, flash after 2 seconds.
Icon Button Function
OK/
OK/
Anti-shake
1. Confirm a selection when using the OSD menus
2. In Capture mode:
• Press to enable/disable the Anti-shake in Auto mode
• Press to enable AF area selection using 4-way
navigation buttons (except Auto/ Av/ Tv/ Landscape/
Night Landscape/ Fireworks)
• Press to enable Aperture selection in Aperture Priority
mode (Av)
• Press to enable Shutter Speed selection in Shutter
Priority mode (Tv)
3. In Video mode:
• Press to enable/disable the Anti-shake function