119
6
Editing and Printing Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1 Display the screen for DPOF settings in Q mode.
Refer to Steps 1 to 3 on p.117.
2 Use the four-way controller (23) to select [All Images].
3 Press the 4 button.
The message [DPOF setting for all images]
appears.
4 Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in “Printing Single
Images” (p.118) for details of how to make
the settings.
5 Press the 4 button.
The DPOF settings for all the images are saved and the camera
returns to the DPOF setting screen.
Printing All Images
The number of copies specified in the DPOF settings applies to all
the images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made for
all images.
MENU
Slideshow
OK
OK
Cancel
1, 2, 4
1, 3, 5
4
DPOF setting for
all images
DPOF setting for
all images
MENU
Copies
Date
00
Date
Cancel
OK
OK
To Next Page
Loading...
Need help?
General
